
Saturday, March 20, 2010
How did we get here?

Thursday, March 11, 2010
San Blas Ramble

Passage: Isla Isabela to San Blas
Travel time: 10.5 hours (1 hr engine to recharge batteries)
Average speed: 4.1 knots
Approximate mileage: 43.5 nautical miles
At 0715, March 6th, the morning of departure from Isla Isabela, Chris was on Tao listening intently to the weather forecast from Don Anderson on the Amigo Net for the roughly 45-mile journey to San Blas, Nayarit. His weather sources correlated well which hopefully meant another beautiful sunny day with 20 knots of wind building from the NW. Plume and then Estrella powered out of the anchorage early to ensure reaching the destination by nightfall. Waiting for wind, Chris on Tao and Ryan and Kristina on Caramelo were left comfortably rolling in the island’s southern cove. Chris had prepared Tao the night previously for an early departure, but the wind remained light after his preferred departure time, so he fired up Yannie, weighed anchor, and made his way slowly out of the rocky cove. At last, the first consistent breezes piped up from the north at around 0900 local, and he was able to shut off the engine and set sail SE out towards the San Blas waypoint.

Chris felt sadness while watching Isabela slide out of view astern of Tao, but he held tight to his goal of reaching Punta de Mita and
San Blas was an intermediate layover point on the journey south. It was a place that Chris had heard was great to visit, but not to stay. Not for the local atmosphere or the bad anchorage, because both of these things were reported exceptional, but for the bugs. A large estuary and mangrove forest surrounds San Blas, creating perfect breeding grounds for the little beasts. Yes, mosquitoes swarmed around, but it’s the no-see-ums that really present problems. These little buggers have no problem passing directly through most normal sized mosquito mesh. To top things off, the entrance to the estuary where the best anchorage is found requires some tricky maneuvering as the surf surges in along the silt and sand shoals that build up all around the southwestern jetty. A safe entrance depended greatly on the position of the shifting shoals, tide, swell, and wind direction. (In fact, a controversial expatriate now living in San Blas has taken advantage of this and charges cruisers for his assistance upon entering. Several other cruisers have rebelled against the status quo and have provided a map with printed waypoints so that entry can be undertaken without assistance. A considerable amount of heated drama still remains concerning this situation.)


On final approach to San Blas, friends Jody and Russ from s/v Smokin’ Blues radioed Chris and Caramelo with helpful waypoints for safe entry to the estuary. Just around the corner from the entrance to San Blas estuary lies
Crocodiles, Mangroves, and No-See-Ums

The morning after his arrival, Chris awoke to a brilliant sunrise over the current sailing fleet (Plume, Estrella, Caramelo, Smokin’ Blues, and Tao) at anchor. All was calm except for daily swing in the current, in on the rising and out on the falling tides. The hot shower and internet at the Singlar Marina located a short dinghy ride away were luxurious. Daytime shore excursions revealed that San Blas was an important Spanish supply depot for cargo ships making their way north and south along the Mexican coast and beyond. Our fleet visited a large fort atop the closest and highest hill, complete with canons and old church structure surrounded by old banana tree plantations. The cobble streets were full of rounded rock so large, Chris had sore ankles after a day of walking. Luckily, due to the incessant bugs during the evening and morning hours, prices for goods and services in San Blas have not been inflated by tourism. Several good 10 peso taco stands set up around the main square were visited for lunch and dinner and labor for boat work in the yard is purported to be the most reasonable in
The large and extensive San Blas estuary is full of sinuous waterways weaving through thick mangroves, providing an amazing habitat for unique species of birds, crocodiles, fish, and iguanas. At 0630 on March 8th, our sailing fleet all hopped on a panga for a half day tour up into the mangroves, to a crocodile zoo, and to a fresh water spring. The pangero (or panga driver) was very knowledgeable about the local ecosystem, providing answers to all of our questions about what we were seeing. It was a peaceful morning boat ride, in which we observed a ton of wildlife 
Ball and Chain
In addition to providing easy access to San Blas, the calm anchorage in the estuary allowed Chris to complete several boat projects that had been awaiting his full attention. As with homeownership, boatownership comes at a price; constant vigilance and maintenance. However, unlike a house, most boats have not been maintained to explicit codes or standards, and the infrastructure for maintaining and repairing boats isn’t nearly as exhaustive and ubiquitous as that for land homes. As a result, most boats and their systems have been put together according to the whim of their owners, which tends to result in poor and unprofessional project execution, and requires any new owner to carefully study and familiarize oneself with the idiosyncrasies of each item onboard. Only with the complete knowledge of how all systems are put together and work will a boat owner know what to do when a problem arises, undoubtedly far from help and in a rolling, raucous sea. Thus, intimate knowledge of a boat is a matter of safety and survival, not just a matter of interest or a hobby. Finally, and most importantly, our boat is under the constant onslaught of salt, water, and sun, a highly corrosive combination to every material imaginable. Although Shawn and Chris have both admittedly struggled with this continuous responsibility, we have both also found ways to enjoy what we view as a once in a lifetime experience and have integrated the boat chores as part of the adventure.
What follows is a short list of the repairs and upgrades Chris accomplished over approximately 35-40 hours sprinkled over the two week period spent in San Blas. This list is not complete list, nor is it out of the ordinary. It is an example of the constant efforts put toward making our cruising dream a reality.
2.) Installed a Link 20 battery monitor with shunt and an 800 watt inverter; purchased the previous summer, it is nice to be able to power the dust buster without the noise of the generator. The new battery monitor is mesmerizing, and Chris has often caught himself having just spent 15 minutes or more sitting and staring at a screen that continuously scrolls statistics about power consumption and replenishment onboard.
3.)Maintenance of “SeaHor”, Tao’s 2HP outboard, which has been acting up. First Chris changed the spark plug, which made a difference for approximately 1-hr run time, after which the engine wouldn’t start easily anymore. Second, he pulled apart and cleaned the carburetor which only slightly improved things. Next, he took the fly wheel off to inspect all the electrical connections and the agneto. Ultimately, the connections within the spark plug wire needed to be redone. While pulling apart the engine, Chris managed to strip one of the bolt holes in the cylinder head. Nothing a little more time, some trusty 3M 5200, and a heli-coil donated by Caramelo didn’t fix. Chris is now researching the possibility that the fuel he has may be contaminated in some way. He’s trying a new filtered batch as an experiment. Now, she runs but still takes a little TLC to get started. One night, in frustration, Chris pulled the starter handle “rather aggressively” and managed to break the plastic handle in half. His relationship with the outboard is definitely tenuous because he now has his eyes set on upgrading to a 2-stroke 15 for long range surf expeditions and general exploration. Shawn believes Chris has hurt SeaHor’s feelings and is planning to treat her well when she returns.
4.) Galley fan rebuild; our multi-directional, 3-speed, timer fan has not been working. After carefully pulling the fan apart, Chris discovered that several items on the fan’s brain, a motherboard of sorts, needed to be re-soldered.
5.) LPG system leak test; a regular maintenance item that hadn’t been completed in more than a month. No problems there…yet.
6.) Cabin top fiberglass chafe; Over time the movement of the traveler lines has worn holes into the cabin top, the starboard side wore completely through the ½ inch fiberglass and created a small hole for water ingress into the inner cavity. Using a vice, hack saw, dremel tool, and a metal file, Chris produced two custom pieces of stainless steel rub strake for chafe protection which he then affixed to the cabin top with 3M’s 5200.
And it doesn’t end there…Chris spent a morning sawing and re-glueing the outer fitting of Tao’s aluminum whisker pole that had buckled under off-angle load. Now the surfboard rack looks like it’s putting holes into the fiberglass longboard… More projects reveal themselves daily, and the list of “to do” items never seems to diminish. Sometimes the list can grow so overwhelming that it’s important to stop, reflect, and recognize how much has actually been accomplished instead of focusing every ounce of energy on what hasn’t. Little reminders like this allow us to enjoy ourselves along the way as we continue forward.
Tuesday, March 9, 2010
Southbound to Isla Isabela

Passage: Mazatlan to Isla Isabela
Travel time: 21.75 hours
Average speed: 4.1 knots
Approximate mileage: 88 nautical miles


It turned out that it was a good night to test the Yanmar, as seas were nearly flat and wind was negligible with only a few minor gusts. She took to her new job with enthusiasm, pushing Tao ahead at a comfortable 5+ knots all night long. Coincidentally, this was also the first time the tiller pilot was able to be used, as Chris had just finished putting together the pieces for proper function amid the tornado of engine repair tasks. It only took a few minor adjustments before “Captain Tilly” took the helm and steered a straighter track than any helmsman could ever hope to.

With the assistance of two nearby boats with radar, Chris was actually able to take a few half hour catnaps throughout the early morning hours of the night passage. With only 20-nm to go, the sun rose, winds picked up from the NW ever so slightly, and Chris decided to fall behind the other two boats to sail the rest of his way in towards Isla Isabela. There’s nothing quite like sailing to anchor on an island in the middle of a large body of water. Chris came in under sail at 2.5-knots of speed over ground and watched as the island’s features grew more defined.

The sound of waves crashing against the volcanic basalts of the rugged island became louder, along with the constant bird calls and the sight of whales flapping their tails and pectorals while blowing spouts. Chris happily set the hook next to Caramelo and Estrella who were already anchored deep in the south anchorage. Guidebooks describe the anchorage as what remains of the primary caldera on the island. After inflating the dinghy and cleaning barnacles off of Tao’s bottom, Chris was barely able to cook a meal before crashing into bed in exhaustion.

The next 5-days were spent recovering and enjoying the rewards of finally exiting the big city of

This mini-Galapagos was truly amazing. Pelagic and reef fish were mixed together among the crags of the ancient volcanic flows that formed the northern

On Friday, March 5th, Chris awoke to the deep red colors of an early sunrise reflecting off the dense cloud cover brought from nearly 4,000-miles away on the Pineapple Express. Most of the
Sunday, March 7, 2010
Monte, meet Yannie


Chris still had hopes to get the engine fixed and Tao ready for sailing before his good friend Monte was due to visit February 19th-23rd. No dice. Apparently, parts shipped from the US using a preferred mail courier first get held up with customs paperwork, and then the courier drivers want a cut before they deliver the item to its intended destination. This occurs with DHL and UPS alike and, according to Total Yacht Works, could take up to 3 weeks depending on the demeanor of the person who was in charge when the package arrived. So, with a well timed visit from Monte on the horizon, Chris opted to 2nd Day Air the gaskets he needed from

Monte arrived safe and sound and hand delivered the ordered engine parts on Friday, February 19th. Monte’s first full day was spent with Chris and Adam putting Yannie’s head back on by reversing the steps Chris and his Dad went through to get the head off. Once finished, Yannie had received a new head gasket, exhaust manifold gaskets, and a new mixing
elbow (Total Yacht Works manufactured from scratch at a local machine shop). Valves were adjusted, the correct torque was applied to both the studs and nuts with a borrowed torque wrench, and all hoses were connected. The time had come to turn the engine over, and… Wait for it… She fired right up! Thanks for the support from all the folks on the Sonrisa Net who jumped in to give some good help and advice during the early stages of the blowout, those who lent a hand in Marina Mazatlan and the Old Harbor, and especially to Adam and Kris from s/v Estrella and Monte Lunacek for their hands on support aboard Tao during this ordeal.

After enjoying a lovely dinner and a few tasty margaritas with Estrella in the main square of old town

It wasn’t far, but Monte had a flight to catch and time was short. They spent the night on the hook off the southeast corner of Isla Venados, and apart from a slight roll and steady NW breeze, they both slept well. Morning of February 22nd dawned bright and beautiful over

They enjoyed a pleasant sail back to the

Saturday, March 6, 2010
TAO's first Carnaval


On the February 7th, still engineless, Chris’s father Dave flew back to

Carnaval proper spanned nearly a week, beginning Thursday, February 11th and ending Tuesday, February 16th. Again, Chris joined crews from several other cruising sailboats for forays into the largest of the Carnaval events, a reenactment of a battle between the French Navy and the Mazatlecos in the 1800s and an impressive parade. All night party goers from around

The highlight for Chris was the hour long fireworks display used to bring the battle with the French navy back to life. Fireworks were set off onboard several ships offshore depicting the attack on


Friday, March 5, 2010
Engine woes in Marina Mazatlan (Feb 5-15), just in time for Carnaval

Apart from a few speed bumps, Tao’s visit in

Chris and Dave removed the head and handed it over to Total Yacht Works for a more complete analysis of the damage extent. Initial reports in the days that followed indicated over 10 thousandths of an inch of head warp from overheating, which is over 2 times the specified limitations in the engine manual. Estrella, Tao, and friends began the search for a used head on the aftermarket, considering the brand new one from Yanmar had a $2,800 price tag, not including the shipping and import taxation. Apparently anything from Asia gets an import tax hike when shipping inbound. Ouch!

Online search efforts failed and repowering options were being considered when reports from Total Yacht Works recanted the initial diagnosis of a badly warped head. In fact, the head was within the specified 4 thousandths of an inch manufacturer limit, BUT another problem had been spotted. Cracks were identified in the seat of one of the exhaust valves. Upon visual inspection, these cracks were hard to see. Stepping back, Chris discussed with Rafael and his father about the root cause of the blown gasket in the first place…overheating. In a raw water cooled engine, sea water passes through passageways in and around the head and block surrounding the pistons where the most heat is produced during engine combustion. Upon visual inspection, a majority of these passageways for cooling were at least partially and some completely clogged. Chris spent half a day clearing these with a scratch awl and anything else sharp that he could fit into the tight spaces. The narrow constrictions which passed water from head to block, and vice versa, had been especially blocked. The overheating alarm never went off, which indicates that the head was unevenly overheated. The areas that were reached by the seawater cooling water were within normal temperature ranges, while the areas that were clogged where likely overheated, eventually resulting in the blown gasket. With raw water passageways cleared, Chris hopes that returned normal water flow in these areas will prevent future over heating of the head once reinstalled. More on the engine repair will follow soon...